Paint Correction

  • Red Clay Bar $5.00 Special

    Red Clay Bar $5.00 Special


    Choose (1) Clay Bar for each gallon of Anti-Static or Lubricant you purchase. Add the Clay Bar to your cart, then make sure you add 1 gallon of Anti-Static or Lubricant for each  Clay Bar you add before you check out.

    Working with a detailing clay bar is very easy, but you must know how to use it properly. Using a clay bar wrong will make a mess and could damage the surface of your paint job. Do not use detailing clay on plastic surfaces or headlight lenses.

    Wash and dry your vehicle to remove any loose dirt. Avoid hot, direct sunlight. Clay bars become soft as they get warm, making them less effective.  Spray Anti-Static on a section of your automobile (including chrome) and rub the clay bar back and forth with light to medium pressure.

    If the lubricant begins to dry, spray more Anti-Static on the surface.  Detailing clay is sticky and can not be used dry or you run the risk of scuffing up your paint.  Reshape the clay bar to keep it clean.  Keep rubbing it back and forth up until all contaminates and bumps are gone. Our Lubricant is the perfect lube for ALL detail clay bars.

    Used, filthy clay bars will get rid of stubborn, embedded brake road, tar and dust film from wheels that have a factory clearcoat or powder coat surface.  Used clay can also be used to get rid of dirt film on glass windows.