GREAT FOR GEL-COAT

 

#9 BRISTOL CUTTING COMPOUND

 

TECH SHEET

#9 BRISTOL™ CUTTING COMPOUND is a high quality abrasive buffing compound. It is recommended for badly oxidized metallic and silver paints. #9 BRISTOL™ CUTTING COMPOUND will not streak smear or gum pad. It is ideal for use in detail shops.

FEATURES

Buffs to high gloss - Contains no silicone or waxes

Excellent for "Gel-Coat" finishes

HOW TO USE

*Read MSDS before using

Caution: To minimize the possibility of staining, do not apply in direct sunlight or onto a warm surface.

To Avoid Burning While Compounding: Keep polisher moving and do not let surface dry out.

* Apply enough compound to cover a 2-ft. x 2-ft. area

* Spread the compound uniformly over the surface with a compounding pad or a brush

* Use a slow speed polisher (1500-2500 rpm) and a Production SW-9 polishing pad. Keep the polisher moving in a circular motion with sufficient pressure to allow the compound to do an efficient job of cutting. As the gloss develops, reduce the pressure of the polisher to produce a high gloss.

After Compounding: Apply AX313 by hand or Film Clearer or Phase II by machine equipped with a Production C-17 or 747 cutting pad to fill swirl marks and increase surface gloss. AX313, Film Clearer or Phase II will also clean up any remaining compound.

 

Production Car Care Products - Stockton, CA 95205 - (209) 943-7337

..